Machinery, Measurement Systems, Tools & Accessories

Have questions? Call toll free!
(800) 532-2636

Mill-Drills & Drill Presses
• Rong Fu - RF Mill-Drills
• Rong Fu RF - Heavy Duty Drill Presses
• Rong Fu RF - Mini Radial Drilling Machine
• Servo Drill Presses

RF Mill-Drills


         RF-31 / RF31N2F
RF-40
RF-45
RF Mill Drill – Step Pulley Series
RF Mill Drill - Geared Head Series

• Step Pulley
• Single Speed Motor (optional 2 speed motor 220V 3Ø  -special order)
• Motor 2HP 110V 1Ø or 220V 3Ø
• RF31N2F - power down feed Motor 2HP 110V 1Ø or 220V 3Ø
• 12 Spindle speeds: 120-2500 RPM
• R8 Spindle Taper
• Spindle to Column 5 1⁄2”
• Working table 8.25" x 28.75"
• Machine Travels:
– X – 18 1/8”
– Y – 6 1⁄4”
– Quill – 5 1/8”
• Weight – 675 lbs
• Made in Taiwan
• Detailed specifications available upon request
• Machine Capacity:
– Drilling - 1.25" (steel)
– Tapping - 1/2" (steel)
– End mill - 3/4"
– Face mill - 4"
Standard accessories included

• Geared Head
• Single Speed Motor (optional 2 speed motor 220V 3Ø  -special order)
• Motor 1.5 HP 110V 1Ø or 220V 3Ø
• RF40N2F - power down feed Motor 2HP 110V 1Ø or 220V 3Ø
• Head tilts 90° left - 45° right; swivels
• 6 Spindle speeds: 60-1500 RPM
• R8 Spindle Taper
• Spindle to Column 6 1⁄2”
• Spindle to table (max): 18.5"
• Working table 8.1/4”" x 28. 3/4"
• Machine Travels:
– X – 19 3/4”
– Y – 9”
– Quill – 5 1/8”
• Weight – 675 lbs
• Made in Taiwan
• Detailed specifications available upon request
• Machine Capacity:
– Drilling - 1.25" (steel)
– End mill - 3/4"
– Face mill - 4"
Standard accessories included

• Geared Head
• Single Speed Motor (optional 2 speed motor 220V 3Ø  -special order)
• Motor 1.5HP 110V 1Ø or 220V 3Ø
• RF45N2F - power down feed Motor 2HP 110V 1Ø or 220V 3Ø
• Head tilts 90° left - 45° right
• 6 Spindle speeds: 60-1500 RPM
• R8 Spindle Taper
• Spindle to Column 10”
• Spindle to table (max): 18.5"
• Working table 9 1/2" x 32 1/4"
• Machine Travels:
– X – 20 1/2”
– Y – 8 1/4”
– Quill – 5 1/8”
• Weight – 800 lbs
• Made in Taiwan
• Detailed specifications available upon request
• Machine Capacity:
– Drilling - 1.25" (steel)
– End mill - 3/4"
– Face mill - 4"
Standard accessories included
RF31
RF31V (inverter drive)
RF31N2F
RF31 Stand
 
***Call for Quotation***
RF40
RF40N2F
RF40 Stand
 
***Call for Quotation***
RF45
RF45N2F
RF45 Stand
 
***Call for Quotation***

Optional Accessories

DRO’s
 Acu-rite VUE axis 8” x 18” DRO Package: Call
Fagor Innova 20i 8 x 20 DRO Package: Call

Power Feed
Bestline AL99 SP Table power feed Call

 

Optional Accessories

DRO’s
 Acu-rite VUE axis 10” x 20” DRO Package: Call
Fagor Innova 20i 10"x 20" DRO Package: Call

Optional Accessories

DRO’s
 Acu-rite VUE axis 10” x 20” DRO Package: Call
Fagor Innova 20i 10"x 20" DRO Package: Call

 
RF Heavy Duty Drill Presses
RF Mini Radial Drilling Machine
Acu-Rite Lathe DRO Micro-Line
Acu-Rite Lathe DRO 200L
Acu-Rite Lathe DRO VRO 300L
RF-19 / RF400HC
RF-40HC / RF40S2F
RF40VS
RF35
RF Heavy Duty Drill Presses – Step Pulley Series
RF Heavy Duty Drill Presses – Geared Head Series
Variable Speed
Series
Mini Radial Drilling Machine

• Step Pulley
• Single Speed Motor
• Motor 1HP 110V 1Ø
• 12 Speeds: 110-2580 RPM
• MT3 Spindle Taper
• Spindle travel – 4.72”
• Spindle nose to column – 10”
• Column Diameter – 4”
• Working table 16 1⁄2 ” x .18 1⁄2”
• Drilling capacity – 1.1” (in mild steel)
• Weight – 480 lbs (weight varies on optional models)
• Made in Taiwan
• Detailed specifications available upon request
• Standard accessories included

Optional models:
• RF400HC W/cross table drill press 220V 3Ø square table
• RF400HS W/square table drill press 220V 3Ø
• RF400C2F W/cross table power down feed 220V 3Ø

• Geared Head
• Single Speed Motor
• Motor 1HP 220V 3Ø
• 6 Speed: 60 -1500 RPM
• MT3 Spindle Taper
• Spindle travel – 5.1”
• Spindle nose to table – 18.1”
• Column Diameter – 3”
• Working table travel 7” ” x 13 1⁄2” cross table
• Drilling capacity – 1. 1/4” (in cast Iron)
• Weight – 750 lbs (weight varies on optional models)
• Made in Taiwan
• Detailed specifications available upon request
• Standard accessories included

Optional models:
• RF40HS W/square table 220V 3Ø
• RF40C2F W/ cross table & power down feed 220V 3Ø
• RF40S2F W/Square table & power down feed 220V 3Ø
• RF46SFC 1.5HP Power down feed & Coolant 220V 3Ø

• Variable Speed
• Single Speed Motor
• Motor 2HP 110V 1Ø 220V/440V 3Ø
• Speeds: 300 -2000 RPM
• MT3 Spindle Taper
• Spindle travel – 6.7”
• Spindle nose to table – 32.1”
• Column Diameter – 4.5”
• Working table travel 19 1⁄2”” ” x 22” cross table
• Drilling capacity – 1. 1/4” (in cast Iron)
• Weight – 750 lbs
• Made in Taiwan
• Detailed specifications available upon request
• Standard accessories included

Optional models:
• RF401S2F power down feed

• Single Speed Motor
• Motor 1.5HP 110V 1Ø or 220V/440V 3Ø
• Head tilts 90° left - 45° right
• 5 Spindle speeds: 340 -3000 RPM
• MT3 Spindle Taper
• Spindle travel – 5”
• Spindle to table – 24”; Min – 6”
• Spindle Horizontal travel – 14.87”
• Spindle to Column – 20.87”
• Column Diameter – 3”
• Working table 17 3⁄4” x 21 5/8”
• Swing – 38 1⁄2”
• Drilling capacity – 1. 1/4” (in cast Iron)
• Weight – 650 lbs (weight varies on optional models)
• Made in Taiwan
• Machine Capacity:
– Drilling - 1.25" (steel)
– End mill - 3/4"
– Face mill - 3"
• Detailed specifications available upon request
• Standard accessories included
• RF35 Does Not Do Tappping
RF19
RF400HC
RF400HS
RF400C2F
 
***Call for Quotation***
RF40HC
RF40HS
RF40C2F
RF40S2F
RF46SFC
 
***Call for Quotation***
RF401VS
RF401S2F
 
***Call for Quotation***
RF35

RF35 Stand
RF35 Box Table

***Call for Quotation***

Servo Drill Presses


Standard Drill Press
Unique Offset Column Drill Press
Elbow & Deep Throat Drill Press

For laboratory, prototype and precision production work. Available in chuck and collet models, 12" or 19" column, and inch or metric calibration

  • Inch and Metric versions
  • Drill holes down to 0.002” / 0.05mm Dia.
  • Spindle runout: 0.0002" / 0.005 mm TIR
  • High accuracy down stop for drilling depth control (0.001” / 0.05mm per division)
  • Variable speed spindle (200-20,000 RPM)
  • Quill travel (stroke): 1.5” / 38.1mm
  • Keyless Albrecht chuck versions for quick and easy drill change; standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm
  • WW collet versions for less run out and improved accuracy; 0.0039"-0.252" / 0.1-6.4 mm collet sizes available
  • Graduated dial gauge for depth control
    (0.001” / 0.05mm per division)
  • Wide selection of bases and accessories
  • Drill capacity: to 1/16" in inconel
    to 1/8" in steel to 3/16" in aluminum (collet only)
  • Electrical: 115 volts AC, 50/60 Hz, 2 amps (220V/115V transformer available)

For a wide work piece, such as a PC board. Drill to center of a 17" circle. Available with Albrecht chuck and inch or metric calibration.

  • Inch and Metric versions
  • Drill holes down to 0.002” / 0.05mm Dia.
  • Spindle runout: 0.0002" / 0.005 mm TIR
  • High accuracy down stop for drilling depth control (0.001” / 0.05mm per division)
  • Variable speed spindle (200-20,000 RPM)
  • Quill travel (stroke): 1.5” / 38.1mm
  • Keyless Albrecht chuck versions for quick and easy drill change; standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm
  • WW collet versions for less run out and improved accuracy; 0.0039"-0.252" / 0.1-6.4 mm collet sizes available
  • Graduated dial gauge for depth control
    (0.001” / 0.05mm per division)
  • Wide selection of bases and accessories
  • Drill capacity: to 1/16" in inconel
    to 1/8" in steel to 3/16" in aluminum (collet only)
Electrical: 115 volts AC, 50/60 Hz, 2 amps (220V/115V transformer available)

For larger work pieces. Available in chuck and collet models with inch or metric calibration.

  • Inch and Metric versions
  • Drill holes down to 0.002” / 0.05mm Dia.
  • Spindle runout: 0.0002" / 0.005 mm TIR
  • High accuracy down stop for drilling depth control
    (0.001” / 0.05mm per division)
  • Variable speed spindle (200-20,000 RPM)
  • Quill travel (stroke): 1.5” / 38.1mm
  • Keyless Albrecht chuck versions for quick and easy drill change; standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm
  • WW collet versions for less run out and improved accuracy; 0.0039"-0.252" / 0.1-6.4 mm collet sizes available
  • Graduated dial gauge for depth control
    (0.001” / 0.05mm per division)
  • Wide selection of bases and accessories
  • Drill capacity: to 1/16" in inconel
    to 1/8" in steel to 3/16" in aluminum (collet only)
  • Electrical: 115 volts AC, 50/60 Hz, 2 amps (220V/115V transformer available)
See Model Number Chart Below
See Model Number Chart Below
See Model Number Chart Below
Inch Version
Metric Version
Inch Version
Metric Version
Inch Version
Metric Version
Chuck Version
Chuck Version
Chuck Version

M-7000: Call!
M-7100: Call!
M-7030: Call!
M-7130: Call!

M-7040: Call!
M-7140: Call!

M-7010: Call!
M-7110: Call!
Collet Version
Collet Version

M-7050: Call!
M-7150: Call!
M-7070: Call!
M-7170: Call!

M-7060: Call!
M-7160: Call!
Standard Drill Press Models
7000/7100
7010/7110
7050/7150
7060/7160
Drill Press with Unique Offset Column
7030/7130
Drill Press with Elbow and Deep Throat
7040/7140
7070/7170
I = Inch; M = Metric
[ ] See Drawings		 7000-I
7100-M		 7010-I
7110-M		 7050-I
7150-M		 7060-I
7160-M		 7030-I
7130-M		 7040-I
7140-M		 7070-I
7170-M
Chuck or Collet Chuck Chuck Collet Collet Chuck Chuck Collet
Max. Distance of chuck/collet to base [a] 6"
152mm		 13"
330mm		 7.5"
190mm		 14.5"
368mm		 6"
152mm		 16.5"
419mm		 18"
457mm
Throat Depth [b] (spindle CL to column) 3.5"
89mm		 3.5"
89mm		 3.5"
89mm		 3.5"
89mm		 8.5"
216mm		 9.4"
239mm		 9.4"
239mm
Working base area (width) [c] 6.5"
165mm		 165mm6.5"
165mm		 6.5"
165mm		 6.5"
165mm		 9.75"
248mm		 9.75"
248mm		 9.75"
248mm
Working base area (width) [d] 6.5"
152mm		 6.5"
152mm		 6.5"
152mm		 6.5"
152mm		 13.25"
324mm		 13.25"
324mm		 13.25"
324mm
Column diameter through head [e] 1.25"
31mm		 1.25"
31mm		 1.25"
31mm		 1.25"
31mm		 1.25"
31mm		 1.25"
31mm		 1.25"
31mm
Column diameter through elbow [f] -- -- -- -- -- 1.625"
41mm		 1.625"
41mm
Column length [g] 12"
305mm		 19"
483mm		 12"
305mm		 19"
483mm		 7.5"
191mm		 18"
457mm		 18"
457mm
Footprint width 7.15"
181mm		 7.15"
181mm		 7.15"
181mm		 7.15"
181mm		 10.5"
267mm		 10.5"
267mm		 10.5"
267mm
Footprint depth 11.8"
299mm		 11.8"
299mm		 11.8"
299mm		 11.8"
299mm		 18.5"
470mm		 18.5"
470mm		 18.5"
470mm
Overall height 18"
457mm		 25"
635mm		 18"
457mm		 25"
635mm		 18"
457mm		 29.5"
749mm		 29.5"
749mm
Weight 21#
9.5kg		 21#
9.5kg		 21#
9.5kg		 21#
9.5kg		 27#
12.2kg		 40#
18.1kg		 40#
18.1kg
Base Fine grain, ground cast iron base Fly-cut cast aluminum base with fine grain cast iron offset and elbow
Drill Press Accessories
Description
Model #
Price
Standard Mill R8 Taper Adapter
M-0705
Call!
Microprocessor Controlled Quill Feed (New-Factory Installed)
M-0708
Call!
Microprocessor Control Retrofit (Returned for Factory Retrofit)
M-0708-IN
Call!
Drill Tap Control (Factory Installed Only, Includes Foot Switch)
M-0709
Call!
Micro Quill Foot Switch Option
M-0710
Call!
Precision Fence Gauge option M-0727 Call!
Accessory Tool Kit Option M-0728 Call!
Dual Column & Base Option - Std 12" and 19" column M-0729-1 Call!
Dual Column & Base Option - Large Columns & Elbows M-0729-2 Call!
Tilt & Rotate Articulating Head Bracket M-0730 Call!
X-Y Table Option (Head Purchased Separately) 59313 Call!
We also have...

Servo Drill Press with Elbow & T-Slot base

Servo heavy Duty Drill Presses

***Call For Quotation***

Prices and Availability Subject to Change