P.O. Box 3071 - 23155 Schumann Rd. - Chatsworth, CA 91311
Toll Free: (800) 532-2636 • Phone: (818) 727-0957 •
Fax: (818) 727-1073

Wed., September 20, 2017

2:42 PM PST











Milling Machines
Can-Do Mills
Birmingham Mills
Sharp Mills
Republic Lagun Mills

Precision Lathes
YLC Birmingham Geared Head Gap Bed Lathes
CT Birmingham Geared Head Gap Bed Lathes
LUX-Matter Birmingham Geared Head Precision Lathes
DL Birmingham Heavy Duty Precision Lathes-High Speed
DL Brimingham Heavy Duty Precision Lathes-w/Taper Turn Attachment
NDL Birmingham Precision Series Lathes
DLC Birmingham Heavy Duty Coqest Type Lathes

Mill Drill & Drill Presses
Rong Fu RF Mill-Drills
Rong Fu RF-Heavy Duty Drill Presses
Rong Fu - Mini Radial Drilling Machines
Servo Drill Presses

Power Feeds
Bestline - 135/150 lb
Servo - Dynamo
Servo - Type 140/150
Servo Turbo
Parts - Bestline & Servo

Machine Accessories
Lubricating Pumps
Air Power Drawbars
Other Machine Accessories


WE ACCEPT:

WE OFFER FINANCING THROUGH:


Equipment Cost:

Email:

Milling Machines
MillMax
Birmingham
Sharp
Republic Lagun

Financing Available

MillMax Vertical Knee Mills
Exclusively from Can-Do Machinery Sales (Dealers Welcome)


CDM2-S / CDM2-V
CDM3-S / CDM3-V
CDM4-S / CDM4-V
  • Table: 9” x 42”
  • 3 Hp, 3Ø 220/440V
  • 16 Speed Step Pulley 70-4620 RPM - CDM2-S
  • Variable Speed Spindle 60-4200 RPM - CDM2-V
  • Motors made in Taiwan
  • Japanese ABEC-7 Spindle Bearings
  • Taiwanese Lead screws. PBC-2 phosphor bronze Anti-Backlash Lead screw nuts
  • Tempered and Carburized Chrome Molybdenum Steel Spindle
  • Power Quill, 3 Feed-Select 0.0015, 0.003, 0.006 in/rev
  • R8 Spindle Taper
  • Induction Hardened & Precision Ground Table & Ways
  • T-Slots (3 x 0.63 x 2.48")
  • Turcite-B Laminated Dovetail & Saddle Ways 
  • Individual Precision Test Results Included
  • Machine Way Guards
  • Control Box with 110/220VAC Outlets Included
  • Manual Lubrication System Included
  • Coolant System and auto lube Optional
  • Ram Rotations on Three Axes (Deg): 0-45, 0-360, 0-90
  • Stress Relieved 250 Mpa, 36,000 psi Tensile Strength Castings Rigid Double Wall Box Structure  
  • Machine Travels: 
    • X – 28.62”
    • Y – 12”
    • Quill – 5"
    • Knee - 13.78
    • Ram - 13.39
  • Standard machine accessories included…
    • 24 VAC 35 Watt Halogen work light
    • Draw bar
    • Tool Box
    • Operation manual
    • Level Pads
  • ISO 9001
  • Dimensions 53” x 66” x 77"
  • Weight 2,200 Lbs
  • Made in China -
    (Privately held Corporation)
  • 1 Year Limited Warranty
  • Table: 10” x 50”
  • 3 Hp, 3Ø 220/440V
  • 16 Speed Step Pulley 70-4620 RPM - CDM3-S
  • Motors made in Taiwan
  • Variable Speed Spindle 60-4200 RPM – CDM3-V
  • Japanese ABEC-7 Spindle Bearings
  • Taiwanese Leadscrews, PBC-2 phosphor bronze Anti-Backlash Lead screw nuts
  • Tempered and Carburized Chrome Molybdenum Steel Spindle
  • Power Quill, 3 Feed-Select 0.0015, 0.003, 0.006 in/rev
  • R8 Spindle Taper
  • Induction Hardened & Precision Ground Table & Ways
  • T-Slots (3 x 0.63 x 2.48")
  • Turcite-B Laminated Dovetail & Saddle Ways
  • Individual Precision Test Results Included
  • Machine Way Guards
  • Control Box with 110/220VAC Outlets Included
  • Manual Lubrication System Included
  • Coolant System and auto lube optional
  • Ram Rotations on Three Axes (Deg): 0-45, 0-360, 0-90
  • Stress Relieved 250 Mpa, 36,000 psi Tensile Strength Castings Rigid Double Wall Box Structure
  •  Machine Travels:
    • X – 33.46”
    • Y – 15.75”
    • Quill – 5”
    • Knee – 15.75”
    • Ram - 21.65"
  • Standard machine accessories included…
    • 24 VAC 35 Watt Halogen work light
    • Draw bar
    • Tool Box
    • Operation manual
    • Level Pads
  • ISO 9001
  • Dimensions 59” x 65” x 85"
  • Weight 2,640 Lbs
  • Made in China-
    (Privately held Corporation)
  • 1 Year Limited Warranty
  • Table: 10” x 52”
  • 3 Hp, 3Ø 220/440V
  • 16 Speed Step Pulley 70-4620 RPM - CDM4-S
  • Variable Speed Spindle 60-4200 RPM – CDM4-V
  • Motors made in Taiwan
  • Japanese ABEC-7 Spindle Bearings
  • Taiwanese Leadscrews. PBC-2 phosphor bronze Lead screw nuts
  • Tempered and Carburized Chrome Molybdenum Steel Spindle
  • Power Quill, 3 Feed-Select 0.0015, 0.003, 0.006 in/rev
  • R8 Spindle Taper
  • Induction Hardened & Precision Ground Table & Ways
  • T-Slots (3 x 0.63 x 2.48")
  • Turcite-B Laminated Dovetail & Saddle Ways
  • Individual Precision Test Results Included
  • Machine Way Guards
  • Control Box with 110/220VAC Outlets Included
  • Manual Lubrication System Included
  • Coolant System and Auto Lube Optional  
  • Ram Rotations on Three Axes (Deg): 0-45, 0-360, 0-90
  • Stress Relieved 250 Mpa, 36,000 psi Tensile Strength Castings Rigid Double Wall Box Structure
  •  Machine Travels:
    • X – 34.25”
    • Y – 16.53” Square Way
    • Quill – 5”
    • Knee – 16.93” Square Way
    • Ram - 21.65
  • Standard machine accessories included…
    • 24 VAC 35 Watt Halogen work light
    • Draw bar
    • Tool Box
    • Operation manual
    • Level Pads
  • ISO 9001
  • Dimensions 63” x 69” x 87"
  • Weight 3,080 Lbs
  • Made in China -
    (Privately held Corporation)
  • 1 Year Limited Warranty
CDM2-S Step Pulley
CDM2-V Variable Speed
 
***Call for Quotation***
CDM3-S Step Pulley
CDM3-V Variable Speed
 
***Call for Quotation***
CDM4-S Step Pulley
CDM4-V Variable Speed
 
***Call for Quotation***


Shown with optional DRO
See the full MillMax line at...

http://www.millmaxusa.com

 

MillMax -Jinpu

CDM5-S / CDM5-V
CDM6-S / CDM6-V
Jinpu CNC Machinery
  •  
  • Table: 11” x 54”
  • 5 Hp, 3Ø 220/440V
  • 16 Speed Step Pulley 70-4620 RPM – CDM5-S
  • Variable Speed Spindle 60-4200 RPM – CDM5-V
  • Motors made in Taiwan
  • Japanese ABEC-7 Angular Contact Spindle Bearings
  • Taiwanese Lead screws
  • PBC-2 phosphor bronze Anti-Backlash Lead screw nuts
  • Tempered and Carburized Chrome Molybdenum Steel Spindle
  • Power Quill, 3 Feed-Select 0.0015, 0.003, 0.006 in/rev
  • R8 Spindle Taper
  • Induction Hardened & Precision Ground Table & Ways
  • T-Slots (3 - 0.63” x 3")
  • Turcite-B Laminated Dovetail & Saddle Ways 
  • Individual Precision Test Results Included
  • Machine Way Guards
  • Control Box with 110/220VAC Outlets Included
  • Manual Lubrication System Included
  • Coolant System and auto lube Optional
  • Ram Rotations on Three Axes (Deg): 0-45, 0-360, 0-90
  • Stress Relieved 250 Mpa, 36,000 psi Tensile Strength Castings Rigid Double Wall Box Structure  
  • Machine Travels: 
    • X – 35””
    • Y – 17.91” Square Way
    • Quill – 5"
    • Knee - 18.11”
    • Ram – 24”
  • Standard machine accessories included…
    • 24 VAC 35 Watt Halogen work light
    • Draw bar
    • Tool Box
    • Operation manual
    • Level Pads
  • ISO 9001
  • Dimensions 59” x 71” x 91"
  • Weight 3,300 Lbs
  • Made in China - (Privately held Corporation)
  • 1 Year Limited Warranty
  •  
  • Table: 12” x 58”
  • 5 Hp, 3Ø 220/440V
  • 16 Speed Step Pulley 80-5400 RPM – CDM6-S+
  • Motors made in Taiwan
  • Variable Speed Spindle 60-3600 RPM – CDM6-V+
  • Japanese ABEC-7 Angular Contact Spindle Bearings
  • Taiwanese Leadscrews
  • PBC-2 phosphor bronze Anti-Backlash Lead screw nuts
  • Tempered and Carburized Chrome Molybdenum Steel Spindle
  • Power Quill, 3 Feed-Select 0.0018, 0.0034, 0.0056 in/rev
  • NT 40 Spindle Taper
  • Induction Hardened & Precision Ground Table & Ways
  • T-Slots (3 - 0.63” x 3.15")
  • Turcite-B Laminated Dovetail & Saddle Ways
  • Full length Gibbs w/ double end adjustments
  • Double Travel Locks
  • Individual Precision Test Results Included
  • Machine Way Guards
  • Control Box with 110/220VAC Outlets Included
  • Manual Lubrication System Included
  • Coolant System and auto lube optional
  • Ram Rotations on Two Axes (Deg): 0-360, 0-90
  • Stress Relieved 250 Mpa, 36,000 psi Tensile Strength Castings Rigid Double Wall Box Structure
  •  Machine Travels:
    • X – 39”
    • Y – 18.11” Square Way
    • Quill – 4.92”
    • Knee – 18.11” Square Way – Power Knee
    • Ram - 24.4"
  • Standard machine accessories included…
    • 24 VAC 35 Watt Halogen work light
    • Draw bar
    • Tool Box
    • Operation manual
    • Level Pads
  • ISO 9001
  • Dimensions 63” x 71” x 95"
  • Weight 3,630 Lbs
  • Made in China - (Privately held Corporation)
  • 1 Year Limited Warranty

 

Jinpu CNC Turret and Machine Centers

Download Jinpu CNC Milling Machine Brochure

 

 

 

Jinpu CNC Lathe

 

Optional Mill Accessories Available

CDM5-S Step Pulley:
CDM5-V Variable Speed:
 
***Call for Quotation***
CDM6-S+ Step Pulley
CDM6-V+ Variable Speed
 
***Call for Quotation***

Birmingham Vertical Knee Mills


BPS 1649/1649-C
BPV 3949/3949-C
BPS 1054/1054-C,
BPV 1054/1054-C/1054-F
  • Table size: 9” x 49
  • Meehanite Casting on BPS 1649
  • Hardened & Ground Work table
  • Hardened & Ground Ways
  • R8 Step Pulley Spindle
  • 3HP, 220V/440V, 3Ø motor - 16 speed (standard)
  • 2 HP, 1Ø motor - 8 speed (available)
  • 16 Speed Spindle 90-5600
  • 8 Speed Spindle 90-2800
  • Ground Work Table T slots
  • Built in Coolant Body
  • Tilt & Rotating Head
  • Chrome ground Quill
  • Hand & Power Spindle Feeds
  • Standard machine accessories included
    • Tool box
    • Front & Rear Chip Guard
    • Draw Bar
    • One shot lube
  • Machine Travels:
    • X – 35.5”
    • Y – 13.25”
    • Quill – 5”
    • Knee – 16”
  • BPS 1649 Made in Taiwan
  • BPS 1649-C Body made in China, Head made in Taiwan
  • Weight - 2500 lbs
  • Table size: 9” x 49
  • Meehanite Casting on BPV 1649
  • Hardened & Ground Work table
  • Hardened & Ground Ways
  • R8 Step Pulley Spindle
  • 3HP, 220V/440V, 3Ø motor – Variable speed (standard)
  • 3 HP, 1Ø motor – Variable speed (available)
  • Spindle Speed  - 60-4300
  • Ground Work Table T slots
  • Built in Coolant Body
  • Tilt & Rotating Head
  • Chrome ground Quill
  • Hand & Power Spindle Feeds
  • Standard machine accessories included
    • Tool box
    • Front & Rear Chip Guard
    • Draw Bar
    • One shot lube
  • Machine Travels:
    • X – 35.5”
    • Y – 13.25”
    • Quill – 5”
    • Knee – 16”
  • BPV 1649 Made in Taiwan
  • BPV 1649-C Body made in China, Head made in Taiwan
  • Weight - 2500 lbs
  • Table size: 10” x 54”
  • 3HP, 220V/440V, 3Ø motor 
  • 3 HP, 1Ø motor (available)
  • Meehanite Casting on BPV 1054/1054-F
  • Hardened & Ground Work table
  • Hardened & Ground Ways
  • R8 Spindle
  • BPS1054/1054-C
    • Step Pulley 16 Speed 90-5600 RPM
  • BPV 1054/1054-C
    • Variable Speed 60-4300 RPM
  • BPV 1054-F
    • EVS Head (Japanese Yaskawa Inverter)
    • Electronic Variable Speed 65-5000 RPM
  • Ground Work Table T slots
  • Built in Coolant Body
  • Tilt & Rotating Head
  • Chrome ground Quill
  • Hand & Power Spindle Feeds
  • Standard machine accessories included
    • Tool box
    • Front & Rear Chip Guard
    • Draw Bar
    • One shot lube
  • Machine Travels:
    • X – 38”
    • Y – 18”
    • Quill – 5”
    • Knee – 18”
  • BPV 1054/1054-F Made in Taiwan
  • BPV 1054-C Body made in China, Head made in Taiwan
  • Weight - 3600 lbs
BPS 1649-C
BPS 1649

***Call for Quotation***
***Price Match Guanratee on Birmingham Mills

Contact us for full Birmingham Line

BPV 3949-C
BPV 3949

***Call for Quotation***
***Price Match Guanratee on Birmingham Mills

\Contact us for full Birmingham Line

BPS 1054-C
BPV 1054-C
BPS 1054
BPV 1054
BPV 1054-F

***Call for Quotation***
***Price Match Guanratee on Birmingham Mills

Contact us for full Birmingham Line

Sharp & Republic Lagun Mills

Sharp
Vertical Bed Mills
Vert./Horiz. Combo Mills
Horizontal Knee Mill
Horizontal Boring/Milling Machine
Lagun
Power Knee Mills
CNC Knee Mills
CNC Knee Rigid Head
Horizontal Knee Mills
Vertical Bed Mills
  • ***Call for Quotation***

    Sharp Vertical Knee Mills 

    LMV
    9” x 42” table, 12” x 30” travel, 3 HP, R-8, vari speed, chromed ways 

    LMV-50
    9” x 50” table, 12” x 37” table, 3 HP, R-8, vari speed, chromed ways 

    TMV
    10” x 50” table, 16.3” x 35” travel, 3 HP, R-8, vari speed, box ways

     TMV-1
    10” x 50” table, 16.3” x 35” travel, 5 HP, #40, vari speed, box ways 

    V-1
    12” x 58” table, 16” x 40” travel, 5 HP, #40, vari speed, box ways 

    Available with CNC

  • ***Call for Quotation***

    Lagun Vertical Knee Mills 

    FT-1
    10” x 44” table, 16” x 30” travel, 2 HP, R-8, Step Pulley, double supported Sq ways 

    FTV-1
    10” x 44” table, 16” x 30” travel, 3 HP, R-8, Vari speed, double supported Sq ways 

    FT-2
    10” x 50” table, 16” x 33” travel, 2 HP, R-8, Step Pulley, double supported Sq  ways 

    FTV-2
    10” x 50” table, 16” x 33” travel, 3 HP, R-8, Vari speed, double supported Sq  ways 

    Deluxe 3L EVS
    11” x 58” table, 18” x 38” travel, 5 HP, #40, Elect Vari speed, double supported Hd Sq  ways

    Available with CNC

  • Prices and Availability Subject to Change

    Welcome to Adobe GoLive 5

    Last modified: Monday, November 14, 2016

    Can-Do Machinery Sales, LLC Home Page | About Can-Do Machinery Sales, LLC & FAQ's | DRO's | Tooling | CNC | Machinery | Email Can-Do Machinery Sales, LLC

    Can-Do Machinery Sales, LLC
    23155 Schumann Rd., Chatsworth, CA 91311, USA | Phone: 800-532-2636 | Fax: (818) 727-1073
    For Sales Email: sales@candomachinery.com | For Installations & Service Email: service@candomachinery.com
    This site is created and maintained by Tade Publishing Group. Home Offices Located in Troy, Michigan
    If you have any questions, comments or suggestions about this site, or if you would like more information on our website design & hosting, please contact: webmaster@tadesite.com