P.O. Box 3071 - 9728 Variel Ave. - Chatsworth, CA 91311
Toll Free: (800) 532-2636 • Phone: (818) 727-0957 • Fax: (818) 727-1073

Fri., May 9, 2008 7:16 AM PST Milling Machines Can-Do Mills Birmingham Mills Sharp Mills Republic Lagun Mills Precision Lathes YLC Birmingham Geared Head Gap Bed Lathes CT Birmingham Geared Head Gap Bed Lathes LUX-Matter Birmingham Geared Head Precision Lathes DL Birmingham Heavy Duty Precision Lathes-High Speed DL Brimingham Heavy Duty Precision Lathes-w/Taper Turn Attachment NDL Birmingham Precision Series Lathes DLC Birmingham Heavy Duty Coqest Type Lathes Mill Drill & Drill Presses Rong Fu RF Mill-Drills Rong Fu RF-Heavy Duty Drill Presses Rong Fu - Mini Radial Drilling Machines Servo Drill Presses Power Feeds Bestline - 135/150 lb Servo - Dynamo Servo - Type 140/150 Servo Turbo Parts - Bestline & Servo Machine Accessories Lubricating Pumps Air Power Drawbars Other Machine Accessories WE ACCEPT: WE OFFER FINANCING THROUGH: In Partnership with Crest Capital Equipment Finance

RF-31 / RF31N2F	RF-40	RF-45
RF Mill Drill – Step Pulley Series	RF Mill Drill - Geared Head Series
• Step Pulley • Single Speed Motor (optional 2 speed motor 220V 3Ø  -special order) • Motor 2HP 110V 1Ø or 220V 3Ø • RF31N2F - power down feed Motor 2HP 110V 1Ø or 220V 3Ø • 12 Spindle speeds: 120-2500 RPM • R8 Spindle Taper • Spindle to Column 5 1⁄2” • Working table 8.25" x 28.75" • Machine Travels: – X – 18 1/8” – Y – 6 1⁄4” – Quill – 5 1/8” • Weight – 675 lbs • Made in Taiwan • Detailed specifications available upon request • Machine Capacity: – Drilling - 1.25" (steel) – Tapping - 1/2" (steel) – End mill - 3/4" – Face mill - 4" Standard accessories included	• Geared Head • Single Speed Motor (optional 2 speed motor 220V 3Ø  -special order) • Motor 1.5 HP 110V 1Ø or 220V 3Ø • RF40N2F - power down feed Motor 2HP 110V 1Ø or 220V 3Ø • Head tilts 90° left - 45° right; swivels • 6 Spindle speeds: 60-1500 RPM • R8 Spindle Taper • Spindle to Column 6 1⁄2” • Spindle to table (max): 18.5" • Working table 8.1/4”" x 28. 3/4" • Machine Travels: – X – 19 3/4” – Y – 9” – Quill – 5 1/8” • Weight – 675 lbs • Made in Taiwan • Detailed specifications available upon request • Machine Capacity: – Drilling - 1.25" (steel) – End mill - 3/4" – Face mill - 4" Standard accessories included	• Geared Head • Single Speed Motor (optional 2 speed motor 220V 3Ø  -special order) • Motor 1.5HP 110V 1Ø or 220V 3Ø • RF45N2F - power down feed Motor 2HP 110V 1Ø or 220V 3Ø • Head tilts 90° left - 45° right • 6 Spindle speeds: 60-1500 RPM • R8 Spindle Taper • Spindle to Column 10” • Spindle to table (max): 18.5" • Working table 9 1/2" x 32 1/4" • Machine Travels: – X – 20 1/2” – Y – 8 1/4” – Quill – 5 1/8” • Weight – 800 lbs • Made in Taiwan • Detailed specifications available upon request • Machine Capacity: – Drilling - 1.25" (steel) – End mill - 3/4" – Face mill - 4" Standard accessories included
RF31: $1,075 RF31N2F: $1,725 RF31 Stand: $150	RF40: $2,395 RF40N2F: $2,895 RF40 Stand: $150	RF45: $2,995 RF45N2F: $3,495 RF45 Stand: $150
DRO’s Acu-rite VUE axis 8” x 18” DRO Package: $895.00 Power Feed Bestline AL99 SP Table power feed: $275.00 *Prices good when Purchased with RF Mill Drill only	DRO’s Acu-rite VUE 2 axis 10” x 20” DRO Package: $895.00 *Prices good when Purchased with RF Mill Drill only	DRO’s Acu-rite VUE 2 axis 10” x 20” DRO Package: $895.00 *Prices good when Purchased with RF Mill Drill only

RF-19 / RF400HC	RF-40HC / RF40S2F	RF40VS	RF35
RF Heavy Duty Drill Presses – Step Pulley Series	RF Heavy Duty Drill Presses – Geared Head Series	Variable Speed Series	Mini Radial Drilling Machine
• Step Pulley • Single Speed Motor • Motor 1HP 110V 1Ø • 12 Speeds: 110-2580 RPM • MT3 Spindle Taper • Spindle travel – 4.72” • Spindle nose to column – 10” • Column Diameter – 4” • Working table 16 1⁄2 ” x .18 1⁄2” • Drilling capacity – 1.1” (in mild steel) • Weight – 480 lbs (weight varies on optional models) • Made in Taiwan • Detailed specifications available upon request • Standard accessories included Optional models: • RF400HC W/cross table drill press 220V 3Ø square table • RF400HS W/square table drill press 220V 3Ø • RF400C2F W/cross table power down feed 220V 3Ø	• Geared Head • Single Speed Motor • Motor 1HP 220V 3Ø • 6 Speed: 60 -1500 RPM • MT3 Spindle Taper • Spindle travel – 5.1” • Spindle nose to table – 18.1” • Column Diameter – 3” • Working table travel 7” ” x 13 1⁄2” cross table • Drilling capacity – 1. 1/4” (in cast Iron) • Weight – 750 lbs (weight varies on optional models) • Made in Taiwan • Detailed specifications available upon request • Standard accessories included Optional models: • RF40HS W/square table 220V 3Ø • RF40C2F W/ cross table & power down feed 220V 3Ø • RF40S2F W/Square table & power down feed 220V 3Ø • RF46SFC 1.5HP Power down feed & Coolant 220V 3Ø	• Variable Speed • Single Speed Motor • Motor 2HP 110V 1Ø 220V/440V 3Ø • Speeds: 300 -2000 RPM • MT3 Spindle Taper • Spindle travel – 6.7” • Spindle nose to table – 32.1” • Column Diameter – 4.5” • Working table travel 19 1⁄2”” ” x 22” cross table • Drilling capacity – 1. 1/4” (in cast Iron) • Weight – 750 lbs • Made in Taiwan • Detailed specifications available upon request • Standard accessories included Optional models: • RF401S2F power down feed	• Single Speed Motor • Motor 1.5HP 110V 1Ø or 220V/440V 3Ø • Head tilts 90° left - 45° right • 5 Spindle speeds: 340 -3000 RPM • MT3 Spindle Taper • Spindle travel – 5” • Spindle to table – 24”; Min – 6” • Spindle Horizontal travel – 14.87” • Spindle to Column – 20.87” • Column Diameter – 3” • Working table 17 3⁄4” x 21 5/8” • Swing – 38 1⁄2” • Drilling capacity – 1. 1/4” (in cast Iron) • Weight – 650 lbs (weight varies on optional models) • Made in Taiwan • Machine Capacity: – Drilling - 1.25" (steel) – End mill - 3/4" – Face mill - 3" • Detailed specifications available upon request • Standard accessories included • RF35 Does Not Do Tappping
RF19: $1,150 RF400HC: $1,450 RF400HS: $1,550 RF400C2F: $2,250	RF40HC: $2,645 RF40HS: $2,645 RF40C2F: $3,225 RF40S2F: $3,395 RF46SFC: $3,995	RF401VS: $2,355 RF401S2F: $2,795	RF35: $2,095 RF35 Stand: $230 RF35 Box Table: $285

Servo Drill Presses

Standard Drill Press	Unique Offset Column Drill Press	Elbow & Deep Throat Drill Press
For laboratory, prototype and precision production work. Available in chuck and collet models, 12" or 19" column, and inch or metric calibration Inch and Metric versions Drill holes down to 0.002” / 0.05mm Dia. Spindle runout: 0.0002" / 0.005 mm TIR High accuracy down stop for drilling depth control (0.001” / 0.05mm per division) Variable speed spindle (200-20,000 RPM) Quill travel (stroke): 1.5” / 38.1mm Keyless Albrecht chuck versions for quick and easy drill change; standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm WW collet versions for less run out and improved accuracy; 0.0039"-0.252" / 0.1-6.4 mm collet sizes available Graduated dial gauge for depth control (0.001” / 0.05mm per division) Wide selection of bases and accessories Drill capacity: to 1/16" in inconel to 1/8" in steel to 3/16" in aluminum (collet only) Electrical: 115 volts AC, 50/60 Hz, 2 amps (220V/115V transformer available)	For a wide work piece, such as a PC board. Drill to center of a 17" circle. Available with Albrecht chuck and inch or metric calibration. Inch and Metric versions Drill holes down to 0.002” / 0.05mm Dia. Spindle runout: 0.0002" / 0.005 mm TIR High accuracy down stop for drilling depth control (0.001” / 0.05mm per division) Variable speed spindle (200-20,000 RPM) Quill travel (stroke): 1.5” / 38.1mm Keyless Albrecht chuck versions for quick and easy drill change; standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm WW collet versions for less run out and improved accuracy; 0.0039"-0.252" / 0.1-6.4 mm collet sizes available Graduated dial gauge for depth control (0.001” / 0.05mm per division) Wide selection of bases and accessories Drill capacity: to 1/16" in inconel to 1/8" in steel to 3/16" in aluminum (collet only) Electrical: 115 volts AC, 50/60 Hz, 2 amps (220V/115V transformer available)	For larger work pieces. Available in chuck and collet models with inch or metric calibration. Inch and Metric versions Drill holes down to 0.002” / 0.05mm Dia. Spindle runout: 0.0002" / 0.005 mm TIR High accuracy down stop for drilling depth control (0.001” / 0.05mm per division) Variable speed spindle (200-20,000 RPM) Quill travel (stroke): 1.5” / 38.1mm Keyless Albrecht chuck versions for quick and easy drill change; standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm WW collet versions for less run out and improved accuracy; 0.0039"-0.252" / 0.1-6.4 mm collet sizes available Graduated dial gauge for depth control (0.001” / 0.05mm per division) Wide selection of bases and accessories Drill capacity: to 1/16" in inconel to 1/8" in steel to 3/16" in aluminum (collet only) Electrical: 115 volts AC, 50/60 Hz, 2 amps (220V/115V transformer available)

See Model Number Chart Below		See Model Number Chart Below		See Model Number Chart Below
Inch Version	Metric Version	Inch Version	Metric Version	Inch Version	Metric Version
Chuck Version		Chuck Version		Chuck Version
M-7000: $ 1495	M-7100: $1530	M-7030: $1805	M-7130: $1825	M-7040: $1995	M-7140: $2020
M-7010: $ 1545	M-7110: $1575
Collet Version				Collet Version
M-7050: $ 1530	M-7150: $ 1560			M-7070: $1980	M-7170: $2000
M-7060: $ 1575	M-7160: $ 1600

Standard Drill Press Models 7000/7100 7010/7110 7050/7150 7060/7160	Drill Press with Unique Offset Column 7030/7130	Drill Press with Elbow and Deep Throat 7040/7140 7070/7170

I = Inch; M = Metric [ ] See Drawings	7000-I 7100-M	7010-I 7110-M	7050-I 7150-M	7060-I 7160-M	7030-I 7130-M	7040-I 7140-M	7070-I 7170-M
Chuck or Collet	Chuck	Chuck	Collet	Collet	Chuck	Chuck	Collet
Max. Distance of chuck/collet to base [a]	6" 152mm	13" 330mm	7.5" 190mm	14.5" 368mm	6" 152mm	16.5" 419mm	18" 457mm
Throat Depth [b] (spindle CL to column)	3.5" 89mm	3.5" 89mm	3.5" 89mm	3.5" 89mm	8.5" 216mm	9.4" 239mm	9.4" 239mm
Working base area (width) [c]	6.5" 165mm	165mm6.5" 165mm	6.5" 165mm	6.5" 165mm	9.75" 248mm	9.75" 248mm	9.75" 248mm
Working base area (width) [d]	6.5" 152mm	6.5" 152mm	6.5" 152mm	6.5" 152mm	13.25" 324mm	13.25" 324mm	13.25" 324mm
Column diameter through head [e]	1.25" 31mm	1.25" 31mm	1.25" 31mm	1.25" 31mm	1.25" 31mm	1.25" 31mm	1.25" 31mm
Column diameter through elbow [f]	--	--	--	--	--	1.625" 41mm	1.625" 41mm
Column length [g]	12" 305mm	19" 483mm	12" 305mm	19" 483mm	7.5" 191mm	18" 457mm	18" 457mm
Footprint width	7.15" 181mm	7.15" 181mm	7.15" 181mm	7.15" 181mm	10.5" 267mm	10.5" 267mm	10.5" 267mm
Footprint depth	11.8" 299mm	11.8" 299mm	11.8" 299mm	11.8" 299mm	18.5" 470mm	18.5" 470mm	18.5" 470mm
Overall height	18" 457mm	25" 635mm	18" 457mm	25" 635mm	18" 457mm	29.5" 749mm	29.5" 749mm
Weight	21# 9.5kg	21# 9.5kg	21# 9.5kg	21# 9.5kg	27# 12.2kg	40# 18.1kg	40# 18.1kg
Base	Fine grain, ground cast iron base				Fly-cut cast aluminum base with fine grain cast iron offset and elbow

Drill Press Accessories
Description	Model #	Price
Standard Mill R8 Taper Adapter	M-0705	$325
Microprocessor Controlled Quill Feed (New-Factory Installed)	M-0708	$1,700
Microprocessor Control Retrofit (Returned for Factory Retrofit)	M-0708A	$1,835
Drill Tap Control (Factory Installed Only, Includes Foot Switch)	M-0709	$400
Micro Quill Foot Switch Option	M-0710	$108